Markus Mueller
| 17.03.2010 | 14:09 | 1 reply
Markus Mueller
Murrelektronik GmbH
Distrubuted Clocks
Hello everybody,
is where a way to readout the DC-timestamp of the EtherCAT via the 8/16bit paralellport of the comX Module?
I want it to use to syncronize my real-time-clock.
I´m using a CA-RE comX module with the CANopen firmware.
regards,
Markus
Andreas Jacob
Hilscher Gesellschaft fuer Systemautomation mbH
Hi Markus,
no, since there is no means to provide a valid value to your application.
Especially, if that is planned to be down to microseconds.
Regards
AJ