industrialNETworX

We found out, that the newest release of the HiTOP IDE chrashes if you reopen your project.

1. Build a new project / open an existing project
2. Saved the project
3. Open this project again

HiTOP starts but at the point, where normaly the application download dialog appears the IDE freeze. You are only able to close the Hitop IDE.

We found out, that the build 0170 have a problem to perform the used commands in the startup-script "sdram_config.scr".

If you have the described problem with your project(s) change the existing sdram_config script with this new one.

sdram_config.scr