Parallel Flash supported by rcX operating system
Hello.
We are designing our custom board with netx100.
I would like to know which parallel flash parts are supported by the rcX OS.
(vendor, part name)
Thanks for your quick response.
But a parallel flash(S29GL128) is used in your NXHX500-RE board.
And this flash is connected via CS0.
What is the aim of this parallel flash in the NXHX500-RE board?
- cth12
Andreas Jacob
Hilscher Gesellschaft fuer Systemautomation mbH
Hi,
the NXHX500 is also usable for alternative operating systems e.g. WinCE or Linux which support this type of flash.
Hi
I'm confused the availability of parallel flash in the rcX.
I could see serveral parallel flash driver APIs in the document rcX_Driver.
For example, DrvPFlsInit(), Drv_PflWriteFlash()......
:roll:
Andreas Jacob
Hilscher Gesellschaft fuer Systemautomation mbH
Yes, but not for the current used ones.
You have only simple access.
Fact is, that the rcX does not support Spansion flashes.
Andreas Jacob
Hilscher Gesellschaft fuer Systemautomation mbH
Hi cth12,
rcX does NOT support any parFlash.
Hilscher strongly recommend to use a serial SPI flash e.g. ATMEL AT45DB321*!